Firmware Updating With K-Pwa-Dlm-320F - Toshiba e-STUDIO 2555C Service Manual

11.5 Firmware Updating with K-PWA-DLM-320F

The firmware of the option (FAX ROM) can be updated individually by using K-PWA-DLM-320F. Update
the ROM data written on each board according to the need such as the case of replacing the board.
Options
Model name
FAX Unit
(GD-1320)
K-PWA-DLM-320F
[1] Connector
[2] Mark for ROM installation direction
[3] LED
[4] ROM
Important:
Pay attention to the direction of the ROM.
Remarks: Useable jigs
Download jigs for this equipment are as follows:
No
1 K-PWA-DLM-320F
2 K-PWA-DLM-320
*Jig No. 2 above can be used if a relay board is installed together even though the shape of its
connector differs.
* Relay board: PWA-DWNLD-RELAY-34F
e-STUDIO2555C/3055C/3555C/4555C/5055C
FIRMWARE UPDATING
Firmware
FAX firmware
[2]
[1]
Fig.11-20
Type of jig
11 - 32
FAX board
[3]
[4]
Remarks
Requires a relay board
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Stored