Density Adjustment - Toshiba e-STUDIO 2555C Service Manual

6.5

Image Quality Adjustment (FAX Function)
6.5.1

Density adjustment

The center density and the density variation controlled by density adjustment keys can be adjusted as
follows.
<Adjustment Mode (05)>
Original mode
Color
Text/
mode
Text *
Photo
Black 7533 7534
7542 -
* Since the gradation in this mode is reproduced in a binary image (black and white), this adjustment
should be a simple binary threshold adjustment.
<Procedure>
(1) While pressing [0] and [5] simultaneously, turn the power ON.
(2) Key in a code and press the [START] button.
(3) Key in an adjustment value.
(To correct the value once keyed in, press the [CLEAR] button.)
Press the [OK] or [INTERRUPT] button to store the value. → The equipment goes back to the
(4)
ready state.
(5) Turn the power OFF.
<Confirmation>
If possible, perform a Fax transmission and check the adjusted density with the image on the recipient's
side.
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Item to be
adjusted
Photo
7535 Manual density
center value
7543 Automatic
density mode
6 - 77
Remarks
[TEXT/PHOTO], [PHOTO]: The larger
the value is, the darker the image
becomes.
[Text]: The larger the value is, the lighter
the image becomes.
Acceptable values: 0 to 255 (Default:
128)
The larger the value is, the darker the
image becomes.
Acceptable values: 0 to 255 (Default:
128)
e-STUDIO2555C/3055C/3555C/4555C/5055C
SETTING / ADJUSTMENT
6