Temperature/Humidity Sensor (S10) - Toshiba e-STUDIO 2555C Service Manual

4.6.21

Temperature/humidity sensor (S10)

(1) Remove the inner cover.
 P. 4-6 "4.1.16 Front cover switch (SW1)"
(2) Lift the hook [1] and remove the temperature/
humidity sensor [2].
(3) Disconnect the 1 connector [3].
Notes:
When installing, align the temperature/
humidity sensor board to the groove, and
press it into the back until it is fixed.
4.6.22 Waste toner paddle rotation detection sensor (S9)
(1) Remove the waste toner paddle motor unit.
 P. 4-102 "4.6.24 Waste toner paddle
motor (M7)"
(2) Disconnect the 1 connector [1], and remove
the waste toner paddle rotation detection
sensor [2].
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-288
Fig. 4-289
Fig. 4-290
e-STUDIO2555C/3055C/3555C/4555C/5055C
4 - 101
DISASSEMBLY AND REPLACEMENT
4