Toshiba e-STUDIO 2555C Service Manual page 790

[F200] Data Overwrite option (GP-1070) disabled
Classification
Other service call
Check item
Setting
[F400] SYS cooling fan abnormality
Classification
Circuit related service call
Check item
SYS cooling fan
SYS board
Replacement part
SYS board
SYS cooling fan
[F500] HD partition damage
Classification
Other service call
Check item
Setting
Replace parts
e-STUDIO2555C/3055C/3555C/4555C/5055C
ERROR CODE AND TROUBLESHOOTING
Data Overwrite option (GP-1070) disabled
Perform firmware installation (all firmware: OS, HDD, SYS,
Engine Main Firmware, and Scanner Firmware) with the
USB device.
* When the function of the Data Overwrite option (GP-
1070) is deleted from the equipment, the service call
"F200" occurs.
Perform 08-3840 to install the Data Overwrite Enabler (GP-
1070).
* If F200 occurs while High ("3") is set for the security
level (08-8911), it cannot be released by installing the
firmware using the USB device. Install the Data
Overwrite Enabler (GP-1070) by 08-3840.
SYS cooling fan abnormality
Check if the fan is rotating properly. If not, check if any foreign
object is adhered.
Check the connector (CN103) and relay connector.
The file system is abnormal.
Diagnose the file system with [5] + [C] + [POWER] → 1.
•
• Check F/S, and then recover the problem partition with [5]
+ [C] + [POWER] → 2. Recovery F/S.
• If it is not recovered, reinstall the software after the HDD
format.
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
8 - 234
Contents
Measures
Contents
Measures
Measure
Error item
Measures
Remarks