(6)
Remove the transfer belt [1] upward.
Notes:
•
When installing the transfer belt, place
the side with the serial number facing
upward (front side).
•
Install the transfer belt in the middle so
that it does not move to one side.
•
Do not touch the belt surface directly with
bare hands.
•
Be sure not to scratch the belt surface.
•
Check if the rib on both ends of the
transfer belt does not run on the rollers.
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-368
Fig. 4-369
e-STUDIO2555C/3055C/3555C/4555C/5055C
4 - 133
DISASSEMBLY AND REPLACEMENT
4