Toshiba e-STUDIO 2555C Service Manual page 478

<Procedure>
While pressing [0] and [5] simultaneously, turn the power ON. → Adjustment Mode
(1)
(2) Select the A4/LT/A3/LD drawer. Key in the pattern number and press the [FAX] button to output a
"Patch chart for adjustment".
600dpi
Pattern No.
70 Plain paper
74 Recycled paper
76 Thick paper 1
78 Thick paper 2
80 Thick paper 3
82 Thick paper 4
84 Special paper 1
86 Special paper 2
88 Special paper 3
90 Thin paper
Notes:
However, this is applied to all paper types when 05-8008 is performed.
1200dpi
Pattern No.
230 Plain paper
234 Recycled paper
236 Thick paper 1
238 Thick paper 2
240 Thick paper 3
242 Thick paper 4
244 Special paper 1
246 Special paper 2
248 Special paper 3
250 Thin paper
Notes:
However, this is applied to all paper types when 05-8009 is performed.
(3) Place the patch chart for adjustment printed in step (2) face down on the original glass, with its
side, on which two black squares are present, aligned against the original scale.
Key in a code and press the [START] button. → The scanner reads the chart automatically and
(4)
performs automatic gamma adjustment calculation (approx. 30 sec.).
600dpi
Code
8004-0 Plain paper
8004-2 Recycled paper
8004-3 Thick paper 1
8004-4 Thick paper 2
8004-5 Thick paper 3
8004-6 Thick paper 4
8004-7 Special paper 1
8004-8 Special paper 2
8004-9 Special paper 3
8004-10 Thin paper
8008 All paper types
e-STUDIO2555C/3055C/3555C/4555C/5055C
SETTING / ADJUSTMENT
Paper type
Used when the code 8004-0 is performed
Used when the code 8004-2 is performed
Used when the code 8004-3 is performed
Used when the code 8004-4 is performed
Used when the code 8004-5 is performed
Used when the code 8004-6 is performed
Used when the code 8004-7 is performed
Used when the code 8004-8 is performed
Used when the code 8004-9 is performed
Used when the code 8004-10 is performed
Paper type
Used when the code 8005-0 is performed
Used when the code 8005-2 is performed
Used when the code 8005-3 is performed
Used when the code 8005-4 is performed
Used when the code 8005-5 is performed
Used when the code 8005-6 is performed
Used when the code 8005-7 is performed
Used when the code 8005-8 is performed
Used when the code 8005-9 is performed
Used when the code 8005-10 is performed
Paper type
When the reproduction of gradation is not
appropriate, the gradation reproducibility of all colors
Y, M, C and K can be corrected by performing this
automatic gamma adjustment.
6 - 52
Remarks
Remarks
Remarks
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved