Ih Board Cooling Fan (F6) - Toshiba e-STUDIO 2555C Service Manual

(6) Remove 2 screws and take off the pressure
roller contact/release motor [1].
Notes:
Note the size (length) of the screws. If
incorrect ones are used, the motor could be
damaged.
4.9.19

IH board cooling fan (F6)

(1) Remove the high-voltage transformer.
 P. 9-9 "9.1.8 High-voltage transformer
(HVT)"
(2) Remove the SYS board case.
 P. 9-2 "9.1.2 SYS board case"
(3) Release the harness from harness clamps,
remove 2 screws and take off the plate [1].
(4) Remove the flat cable cover [1].
e-STUDIO2555C/3055C/3555C/4555C/5055C
DISASSEMBLY AND REPLACEMENT
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
4 - 178
Fig. 4-495
Fig. 4-496
Fig. 4-497