Download Print this page

Toshiba e-STUDIO 2555C Service Manual page 927

Multifunctional digital color systems
Hide thumbs Also See for e-STUDIO 2555C:

Advertisement

(8)
After 10 to 40 seconds have passed, the screen for notifying the success of the performance is
displayed. Then press the [OK] button. If the screen for notifying a failure of the performance is
displayed, quit this operation by pressing the [NO] button. Then check that the one-time dongle is
installed properly in the equipment.
(9)
Check that the installed license is displayed on the license list.
Remarks:
If there are any other licenses to be installed, repeat from step (4).
If there are no other licenses to be installed, press the [CLOSE] button, and then turn the
power OFF.
[L] Enable HDD encryption
If the HDD encryption function is used, follow the procedure below.
(1)
Start up with the Setting mode (08).
(2)
Enter the password, and then press the [OK] button.
(If the password is not set for Service, press the [ENTER] button without entering anything.)
(3)
Enable the encryption function.
For high security mode
Set the value of 08-8911 to "3".
For enabling HDD encryption only
Set the value of 08-8911 to "1", and then set the value of 08-9379 to "1" (Security priority) or
"2" (Performance priority).
(4)
Turn the power OFF.
[M] Adjust image quality
(1)
Start up with the Adjustment mode (05).
(2)
Enter the password, and then press the [OK] button.
(If the password is not set for Service, press the [ENTER] button without entering anything.)
(3)
Perform "Data transfer of characteristic value of scanner" (05-3203).
(4)
Perform "Automatic gamma adjustment" <PPC> (05-7869).
 P. 6-27 "6.2.1 Automatic gamma adjustment"
(5)
Perform "Automatic gamma adjustment" <PRT> (05-8008/8009).
 P. 6-51 "6.3.1 Automatic gamma adjustment"
(6)
Turn the power OFF.
[N] Initialize settings when FAX Unit (GD-1320) is installed
(1)
Reinstall the FAX Unit (GD-1320).
(2)
Start up with the Setting mode (08).
(3)
Enter the password, and then press the [OK] button.
(If the password is not set for Service, press the [ENTER] button without entering anything.)
(4)
Set the destination of FAX (08-9001).
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
e-STUDIO2555C/3055C/3555C/4555C/5055C
9 - 31
REPLACEMENT OF PC BOARDS/HDD
9

Hide quick links:

Advertisement

loading