Color Balance Adjustment - Toshiba e-STUDIO 2555C Service Manual

Multifunctional digital color systems

Hide thumbs Also See for e-STUDIO 2555C:

Color balance adjustment

The color balance is adjusted by adjusting the density of each color at the Full Color Mode. The

adjustment is performed by selecting its density area from the following: low density, medium density

and high density.

Original mode

Yellow 7960-0

Make a test copy and compare the image obtained with the current settings; if necessary, make

adjustments according to the following procedure.

Be sure that this adjustment is made after performing  P. 6-27 "6.2.1 Automatic gamma

adjustment".

Changing the adjustment setting influences the adjacent density area slightly.

E.g.: When the value of the medium density is larger, the adjacent areas in the low density

and high density range will become slightly darker.

While pressing [0] and [5] simultaneously, turn the power ON.

Key in the code of the mode to be adjusted (color and original mode) and press the [START]

Select the density area to be adjusted with digital keys (0, 1 or 2), and press the [START] button.

0: Low density

1: Medium density

2: High density

Key in an adjustment value. (To correct the value once keyed in, press the [CLEAR] button.)

Press the [OK] or [INTERRUPT] button to store the value in memory.

e-STUDIO2555C/3055C/3555C/4555C/5055C

SETTING / ADJUSTMENT

Show Quick Links