Toshiba e-STUDIO 2555C Service Manual page 298

Notes:
• When installing the fuser belt lubricating
sheet, align the 5 holes with the notches
of the fuser belt unit.
Notes:
• When replacing the parts or performing
preventive maintenance, evenly apply
coat of the silicon oil over the whole
surface of the fuser belt lubricating sheet.
Apply the silicon oil between the fuser belt
pad and fuser belt lubricating sheet.
• After applying the silicon oil, check that
there is no foreign matter adhering on the
fuser belt lubricating sheet. Reassemble
immediately to prevent any foreign matter
from adhering.
• When reassembling, check that there is
no foreign matter adhering on the fuser
belt lubricating sheet, fuser belt pad, and
fuser belt pad plate.
e-STUDIO2555C/3055C/3555C/4555C/5055C
DISASSEMBLY AND REPLACEMENT
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
4 - 162
Fig. 4-454
Fig. 4-455