[CB82] Finisher main program error
MJ-1107/1108
Classification
Finisher related service call
Check item
Finisher control board
Replace parts
Finisher control board
[CB83] Saddle main program error
MJ-1108
Classification
Finisher related service call
Check item
Saddle control PC board
Replace parts
Saddle control PC board
[CB84] Punch unit main program error
MJ-1107/1108 (When MJ-6104 is installed)
Classification
Finisher related service call
Check item
Hole punch control PC board (HP)
Replace parts
Hole punch control PC board
[CB91] Saddle flash ROM abnormality
MJ-1108
Classification
Finisher related service call
e-STUDIO2555C/3055C/3555C/4555C/5055C
ERROR CODE AND TROUBLESHOOTING
Finisher main program error
•
Update the firmware version of the finisher control PC
board (FIN).
•
Board check
Saddle main program error
•
Update the firmware version of the saddle control PC
board (SDL).
•
Board check
Hole Punch Unit - Main CPU program error
•
Update the firmware version of the PNC board (HP).
•
Board check
Saddle flash ROM abnormality
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
8 - 168
Error item
Measures
Remarks
Error item
Measures
Remarks
Error item
Measures
Remarks
Error item