St Drawer Paper Feed Roller, Separation Roller, And Pick-Up Roller - Toshiba e-STUDIO 2555C Service Manual

Notes:
When replacing the parts or performing
preventive maintenance, apply 1 rice-sized
grain of white grease (Molykote HP-300) to
the place [1] shown in the figure, and apply
half a rice-sized grain of white grease
(Molykote HP-300) to the 2 places [2] shown
in the figure.
4.5.18 1st drawer paper feed roller, separation roller, and pick-up
roller
(1) Pull out the 1st drawer paper feed unit.
 P. 4-52 "4.5.14 1st drawer paper feed
unit"
(2) Slide the guide to the front side.
(3) Release the roller latch, and remove the
separation roller [1], feed roller [2], and pick-
up roller [3].
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
[1]
Fig. 4-155
Fig. 4-156
Fig. 4-157
e-STUDIO2555C/3055C/3555C/4555C/5055C
4 - 55
[2]
DISASSEMBLY AND REPLACEMENT
4