Toshiba e-STUDIO 2555C Service Manual page 216

(9) Discharge the developer material.
Notes:
• Make sure not to have developer material
adhering to the drive gears or bushings.
• If the developer material on the developer
sleeve is hard to come off, use a brush
(jig) to clean it off.
4407915710 BRUSH-33
[B] Filling developer unit with developer material
(1) Shake the developer material bottle and
attach the nozzle to it.
(2) Pour in the developer until the mixer [1]
under the developer sleeve is full.
(3) Turn the knob [1] in the direction of the arrow
shown on the cover until the developer
material is evenly adhered to the surface of
the developer sleeve.
e-STUDIO2555C/3055C/3555C/4555C/5055C
DISASSEMBLY AND REPLACEMENT
Fig. 4-226
Fig. 4-227
Fig. 4-228
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
4 - 80