1. The exclusion and limitations of liability referred to in this notice shall be effective to the fullest extent permissible at law. For the avoidance of doubt, nothing in this notice shall be taken to exclude or limit TOSHIBA TEC CORPORATION’s liability for death or personal injury caused by TOSHIBA TEC CORPORATION’s negligence or...
RELATING TO THE EULAS MAY BE FOUND IN AN ELECTRONIC FILE INCLUDED ON THE USER DOCUMENTATION CD-ROM INCLUDED HEREWITH; HOWEVER, ALL SOFTWARE AND DOCUMENTATION DEVELOPED OR CREATED BY OR FOR TOSHIBA TEC CORPORATION (“TTEC”) ARE PROPRIETARY PRODUCTS OF TTEC AND ARE PROTECTED BY COPYRIGHT LAWS, INTERNATIONAL TREATY PROVISIONS, AND OTHER APPLICABLE LAWS.
LICENSE AGREEMENT CONTAINS THE COMPLETE AND EXCLUSIVE AGREEMENT BETWEEN YOU AND TTEC AND ITS SUPPLIERS AND SUPERSEDES ANY PROPOSAL OR PRIOR AGREEMENT, ORAL OR WRITTEN, OR ANY OTHER COMMUNICATION RELATING TO THE SUBJECT MATTER OF THIS LICENSE AGREEMENT. TOSHIBA TEC Corporation, 2-17-2, Higashigotanda, Shinagawa-ku, Tokyo, 141-8664, Japan. Software License Agreement...
Security Precautions In order to make correct use of this products security function, first read the following precautions carefully. ISO15408 Certification For customers using e-STUDIO5520C/6520C/6530C and e-STUDIO2330C/2820C/2830C/3520C/3530C/ 4520C We have obtained ISO15408 certification for the system firmware V3.0 in the equipment. The data erasing function will be enabled by registering the security license with GP-1070 (Data Overwrite Enabler, optional).
User Safety This TOSHIBA Multifunctional Digital Systems does not produce laser radiation hazardous to the user. It is certified as a Class 1 laser product under the U.S Department of Health and Human Services (DHHS) Radiation Performance Standard according to the Radiation Control Health and Safety Act of 1968 including amendments.
Because of the extreme variances in composition and quality of paper from various manufacturers, consumers should ensure the recycled paper they use is suitable for the copier. In accordance with the EPA Energy Star Program guidelines, TOSHIBA recommends the following recycled paper for use in the copier- Great White MultiUse 20 paper If you have any questions regarding the use of recycled paper in your copier, contact your authorized service technician.
EMC class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures! Any consequences resulting from the use of this product in restricted working environments are not the responsibility of TOSHIBA TEC.
Toshiba Quality is Second to None It is recommended that genuine Toshiba supplies and parts be used to obtain optimum results. For e-STUDIO5520C/6520C/6530C Toshiba Quality is Second to None...
For e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C Toshiba Quality is Second to None...
For e-STUDIO205L/255/305/355/455 Toshiba Quality is Second to None...
For e-STUDIO555/655/755/855 Toshiba Quality is Second to None...
From the beginning Toshiba supplies and machines were made for each other. Whenever Toshiba designs a new machine, it also designs a new toner that is made just for that machine. By using Genuine Toshiba supplies with Toshiba copiers, you are guaranteed optimum performance.
Other than the above, this manual also describes information that may be useful for the operation of this equipment with the following signage: Describes handy information that is useful to know when operating the equipment. Pages describing items related to what you are currently doing. See these pages as required. Toshiba Quality is Second to None...
CONTENTS Preface............................1 Software License Agreement ....................2 Security Precautions........................ 4 Notice to Users ......................... 5 Toshiba Quality is Second to None ..................8 Chapter 1 GENERAL PRECAUTIONS General Precautions....................... 18 When installing or moving ....................18 When using the Multifunctional Digital Systems..............21 During maintenance or inspection ..................
GENERAL PRECAUTIONS This chapter describes the necessary safety precautions for using the equipment. General Precautions ......................18 When installing or moving ............................18 When using the Multifunctional Digital Systems....................21 During maintenance or inspection ........................27 When handling supplies ............................27...
1 GENERAL PRECAUTIONS General Precautions When installing or moving e-STUDIO5520C/6520C/6530C For U.S.A. and Canada This Multifunctional Digital Systems requires 115 V, 20 A (or 15 A + 20 A), 50/60 Hz electric power. For EU This Multifunctional Digital Systems requires 220 to 240 V AC, 13 A, 50/60 Hz electric power. Except U.S.A., Canada and EU This Multifunctional Digital Systems requires 220 to 240 V AC, 10 A, 50/60 Hz electric power.
1 GENERAL PRECAUTIONS 1.GENERAL PRECAUTIONS When removing the plug from the outlet, do not pull the power cord. Always hold the plug when removing it from the outlet. If the power cord is pulled, the wires may become broken and this could cause a fire or give you an electric shock.
1 GENERAL PRECAUTIONS For e-STUDIO205L/255/305/355/455 Both the Paper Feed Pedestal and the Large Capacity Feeder have 4 adjusters (antiskid devices) underneath. After the equipment has been moved and installed, be sure to turn and lower them to fix it. For the Paper Feed Pedestal, fix the fall-prevention stoppers after the adjusters have been adjusted. Paper Feed Pedestal Large Capacity Feeder Do not install the equipment by yourself or try to move it once it has been installed.
1 GENERAL PRECAUTIONS 1.GENERAL PRECAUTIONS Other points Make sure that there is enough space around the system to facilitate changing of parts, maintenance and clearing paper jam. If there is insufficient space, some operations, such as bypass feeding, will become difficult and the Multifunctional Digital Systems could even break down.
1 GENERAL PRECAUTIONS For e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C and e-STUDIO205L/255/305/355/455 When changing the angle of the control panel, be careful not to catch your hands in the gap between the equipment and the control panel. This could cause personal injury. Do not place 3.3 kg/7.3 lb. or more of objects on an optional work table. Breaking the work table could cause personal injury.
1 GENERAL PRECAUTIONS 1.GENERAL PRECAUTIONS Position of Certification label, etc. For e-STUDIO5520C/6520C/6530C Identification label For U.S.A. and Canada For EU Explanatory label Warning for grounding wire Certification label ( For U.S.A. and Canada ) Warning for high temperature area ( Duplexing unit / Fuser unit ) Warning for high temperature area ( Fuser unit ) Warning for high temperature area ( Bridge unit ) General Precautions...
1 GENERAL PRECAUTIONS For e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C Explanatory label Identification label For U.S.A. and Canada Warning for grounding wire For EU Certification label ( For U.S.A. and Canada ) Warning label Warning for high temperature area ( Fuser unit ) Warning for high temperature area ( Fuser unit ) Warning for...
1 GENERAL PRECAUTIONS 1.GENERAL PRECAUTIONS For e-STUDIO205L/255/305/355/455 Certification label ( For U.S.A. and Canada ) Explanatory label Warning for grounding wire Identification label For U.S.A. and Canada For EU Warning label e-STUDIO205L/255/305 e-STUDIO355/455 Warning for high temperature area Warning for high temperature area Warning for high temperature area ( Fuser unit ) ( Fuser unit )
1 GENERAL PRECAUTIONS For e-STUDIO555/655/755/855 Identification label For U.S.A. and Canada For EU Explanatory label Certification label ( For U.S.A. and Canada ) Warning for grounding wire Warning label Warning for high temperature areas General Precautions...
1 GENERAL PRECAUTIONS 1.GENERAL PRECAUTIONS Other points Be very careful to treat the touch panel gently and never hit it. Breaking the surface could cause malfunctions. Do not turn the power OFF with paper left jammed inside the equipment. This could cause a malfunction when the power is turned ON next time. Be sure to turn the power OFF when leaving the office or if there is a power cut.
ENERGY STAR Program Toshiba Tec Corporation, as a member of the ENERGY STAR Program, attaches the ENERGY STAR logo to all products which meet the ENERGY STAR Program requirements. The ENERGY STAR Program aims at the promotion of the development and wider usage of office equipment including energy-efficient computers in order to address environmental issues such as global warming.
Printed in China FC-5520C/6520C/6530C FC-2330C/2820C/2830C/3520C/3530C/4520C DP-2090/2520/3000/3570/4570 DP-5550/6550/7550/8550 OME080002C0...