Toshiba e-STUDIO 2555C Service Manual page 536

* G5: Recovery blade
Clean the surface of the recovery blade with a soft pad or cloth, if dirt cannot be removed with a
vacuum cleaner. If the edge of recovery blade is damaged, replace the blade regardless of the
number of output pages.
Notes:
Never use water or alcohol for cleaning the transfer belt recovery blade.
* G7: Drum gap spacer
When replacing the drum gap spacer, apply Floil (GE-334C) on the shaft of drum gap spacer.
e-STUDIO2555C/3055C/3555C/4555C/5055C
PREVENTIVE MAINTENANCE (PM)
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
7 - 22