Developer Material - Toshiba e-STUDIO 2555C Service Manual

Notes:
Do not peel off the film [1] on the upper part
of the developer unit.
Notes:
• When installing the developer unit [1],
insert it carefully keeping it horizontal [3].
• If it is tilted (especially if its leading edge
is upward), the upper part of the unit will
catch the edge of the transfer belt [2].
Pushing it will damage the belt.
4.6.3

Developer material

[A] Removing developer material
(1) Remove the developer unit.
 P. 4-76 "4.6.2 Developer unit"
(2) Push the hook and take off the knob [1] by
sliding it to the right.
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-217
[2]
[3]
Fig. 4-218
Fig. 4-219
e-STUDIO2555C/3055C/3555C/4555C/5055C
4 - 77
[1]
DISASSEMBLY AND REPLACEMENT
4