Toshiba e-STUDIO 2555C Service Manual page 716

[CB30] Movable tray shift motor abnormality
MJ-1107
Classification
Finisher related service call
Check Item
Movable tray
Movable tray shift motor (M7)
Movable tray position A, B, and C
sensors (S13, S14, and S15)
Replacement part
Movable tray shift motor (M7)
Movable tray position A, B, and C
sensors (S13, S14, and S15)
Finisher controller PC board
MJ-1108
Check item
Movable tray
Movable tray shift motor (M12) Check the connectors and harnesses between the movable tray
Movable tray position A, B, and
C sensors (S13, S14, and S15)
Parts to be replaced
Movable tray shift motor (M7)
Movable tray position A, B, and
C sensors (S13, S14, and S15)
Finisher controller PC board
e-STUDIO2555C/3055C/3555C/4555C/5055C
ERROR CODE AND TROUBLESHOOTING
Movable tray shift motor abnormality: The movable tray shift
motor is not rotating or the movable tray is not moving normally.
If there is mechanical problem when the movable tray is moved,
fix the mechanism.
Check the connectors and harnesses between the movable tray
shift motor (M7) and the finisher control PC board (CN8).
• Connector check
• Sensor check
Measures
If there is mechanical problem when the movable tray is moved, fix
the mechanism.
shift motor (M12) and the finisher control PC board (CN16).
• Connector check
• Sensor check
Remark
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
8 - 160
Contents
Measure
Measure