Toshiba e-STUDIO 2555C Service Manual page 448

[F] Right margin
While pressing [0] and [5] simultaneously, turn the power ON. → (Adjustment Mode)
(1)
(2) Open the platen cover or RADF.
Press [FAX] → [START] to make a copy at the mode of A3/LD, 100%, Full color, Text/Photo and
(3)
2nd drawer.
(4) Measure the blank area F at the right side of the copied image.
(5) Check if the blank area F is within the range.
Function
Copy
(6) If not, use the following procedure to change values and repeat the steps 3. to 5. above.
<Procedure>
(Adjustment Mode) → (Key in the code [4052]) → [START]
→ (Key in a value (acceptable values: 0 to 255))
→ [OK] or [INTERRUPT] (Stored in memory).
→ ("100% A" is displayed.)
* The larger the adjustment value is, the wider the blank area at the right side becomes
(approx. 0.04 mm/step).
e-STUDIO2555C/3055C/3555C/4555C/5055C
SETTING / ADJUSTMENT
Black Color
2±2.0 mm 2±2.0 mm
Feeding direction
F
Fig.6-17
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
6 - 22