9.1.7
Switching regulator
Notes:
Be sure to unplug the power cable before starting this work.
(1)
Take off the left cover.
P. 4-1 "4.1.2 Left cover"
(2)
Loosen 2 screws and remove the cover [1]
by sliding it toward the rear side.
(3)
Remove 2 screws and slide the switching
regulator slightly toward you.
(4)
Disconnect 10 connectors, and slide the
switching regulator to the front side and take
it off.
e-STUDIO2555C/3055C/3555C/4555C/5055C
REPLACEMENT OF PC BOARDS/HDD
Fig. 9-19
Fig. 9-20
Fig. 9-21
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
9 - 8