(6)
Remove the LED printer head side cover [1].
(7)
Disconnect the flat cable [1].
Notes:
•
When removing the flat cable, change the
lever position so that the connector is
released, and remove the flat cable by
lifting it up slightly (approx. 7 degrees) as
shown in the right figure.
•
When connecting the flat cable to the
connector, insert the flat cable straightly
and lock it securely. Confirm that the tabs
are in the positions shown in the right
figure.
e-STUDIO2555C/3055C/3555C/4555C/5055C
DISASSEMBLY AND REPLACEMENT
Tab
Guide
FFC
Connector
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
4 - 32
Fig. 4-86
Fig. 4-87
Lever position: Locked
Lever position: Released
Fig. 4-88