Toshiba e-STUDIO 2555C Service Manual page 630

[E724] Stop jam at the registration sensor
Classification
RADF jam
Check item
Registration roller
Registration sensor
RADF board
Original width detection
sensor-1
Original width detection
sensor-2
Parts to be replaced
Registration sensor
RADF board
Registration roller
Original width detection
sensor-1
Original width detection
sensor-2
[E725] Stop jam at the read sensor
Classification
RADF jam
Check item
Read roller
Read sensor
Original intermediate transport
sensor
RADF board
Parts to be replaced
Read sensor
RADF board
Read roller
e-STUDIO2555C/3055C/3555C/4555C/5055C
ERROR CODE AND TROUBLESHOOTING
Stop jam at the registration sensor
Clean the registration roller if it is stained.
• Sensor check (Perform the input check: 03-[FAX] ON[7]/[H])
• Connector check (J86, J88)
• Harness check
• Board check
• Connector check (CN74)
• Harness check
• Sensor check (Perform the input check: 03-[FAX] ON[8]/[F])
• Connector check (J94)
• Harness check
• Sensor check (Perform the input check: 03-[FAX] ON[8]/[G])
• Connector check (J94)
• Harness check
Replace it if it is worn out.
Stop jam at the read sensor
Clean the read roller if it is stained.
• Sensor check (Perform the input check: 03-[FAX] ON[7]/[G])
• Connector check (CN75, J94)
• Harness check
• Sensor check (Perform the input check: 03-[FAX] ON[7]/[F])
• Connector check (CN75, J94)
• Harness check
• Board check
• Connector check (CN75)
• Harness check
Replace it if it is worn out.
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
8 - 74
Error content
Measures
Remark
Error content
Measures
Remark