4.12.5
MJ-1036 (Inner Finisher)
(1)
Press the [Power] button on the control panel
to shut it down.
(2)
Turn the main power switch of the equipment
off.
(3)
Disconnect the power cable.
(4)
Remove the connector cover.
(5)
Disconnect the connector.
(6)
Open the finisher cover.
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-603
Fig. 4-604
Fig. 4-605
e-STUDIO2555C/3055C/3555C/4555C/5055C
4 - 219
DISASSEMBLY AND REPLACEMENT
4