Toshiba e-STUDIO 2555C Service Manual page 850

Cause/Section Step
Transfer unit 11
12
Harnesses for 13
CCD, SYS
and LGC
boards
e-STUDIO2555C/3055C/3555C/4555C/5055C
ERROR CODE AND TROUBLESHOOTING
Check item
Is the transfer belt in proper contact
with the drum?
Is the transport of the transfer belt
normal?
Are the connectors securely
connected? Is any harness between
the boards open circuited?
8 - 294
Measures
Check if the contact releasing lever
is at releasing position. Check the
installation of the transfer belt.
Check the installation of the transfer
belt or transport mechanism.
Reconnect the connectors securely.
Replace the harness.
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved