Toshiba e-STUDIO 2555C Service Manual page 180

(3) Remove 1 screw.
(4) Release 2 latches [1], and slide the transport
guide [2] toward the front side, and then pull
out the transport guide.
(5) Release the harness from the harness guide,
and disconnect the 1 connector [1].
(6) Remove 1 screw. Slide the paper guide [1]
toward the front side while pushing [3] of the
rear support [2] of the paper guide [1], and
then pull out the rear support [2].
(7) Slide the paper guide [1] toward the rear side
while pulling the rear side of the paper guide
[1], and then pull out the front support, and
then remove the paper guide [1].
e-STUDIO2555C/3055C/3555C/4555C/5055C
DISASSEMBLY AND REPLACEMENT
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
4 - 44
Fig. 4-122
Fig. 4-123
Fig. 4-124