Sram Board <For Sys Board> - Toshiba e-STUDIO 2555C Service Manual

Notes:
When installing the high-voltage transformer,
make sure the feed springs contact the
plastic (locator) pins as shown in the figure.
9.1.9 SRAM board <for SYS board>
(1) Take off the SYS board cover.
 P. 9-1 "9.1.1 SYS Board cover"
(2) Release 2 latches and take off the SRAM
board for the SYS board [1] with the case.
(3) Release 2 latches [1] and take off the SRAM
board for SYS board [2] from the case.
e-STUDIO2555C/3055C/3555C/4555C/5055C
REPLACEMENT OF PC BOARDS/HDD
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
9 - 10
Fig. 9-25
Fig. 9-26
Fig. 9-27