Procedures And Settings When Replacing Eeprom (For Lgc Board) - Toshiba e-STUDIO 2555C Service Manual

9.2.6 Procedures and settings when replacing EEPROM (for LGC
board)
Notes:
Be careful not to damage the EEPROM when replacing the EEPROM.
A procedure for replacing the SRAM board is shown below.
[A] Replace SRAM board
(1) Confirm that the power is turned OFF.
(2) Replace the EEPROM (for the LGC board).
 P. 9-11 "9.1.10 EEPROM <for LGC board>"
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Start
[A] Replace EEPROM
[B] Initialize LGC board
[C] Adjust image quality
[D] Set line adjustment mode
Setting completed
Fig. 9-38
9 - 33
e-STUDIO2555C/3055C/3555C/4555C/5055C
REPLACEMENT OF PC BOARDS/HDD
9