Toshiba e-STUDIO 2555C Service Manual page 798

[ 3 ] Electronic Filing related error
[2B11] JOB status abnormality
[2B20] File library function error
[2B30] Insufficient disk space in BOX partition
[2BC0] Fatal failure occurred
Erase some data in the Electronic Filing or the shared folder and perform the job in error again (in
case of [2B30]).
Ask the administrator if e-Filing has been disabled. (In case of [2CC1])
Turn the power OFF and then back ON. Perform the job in error again.
Check if there are no other running jobs and perform the HDD formatting ([5] + [C] + [POWER] ON
-> [3] -> [1]).
If the recovery is still not completed, replace the SYS board.
[2B31] Status of specified Electronic Filing or folder is undefined or being created/deleted
Check if the specified Electronic Filing or folder exists.
Delete the specified Electronic Filing or folder.
Change the name of folder to be created.
Perform the job in error again.
[2B50] Image library error
[2B90] Insufficient memory capacity
Turn the power OFF and then back ON. Perform the job in error again.
If the error still occurs, replace the main memory.
Delete the job in progress or being set or in the HOLD/PRIVATE/PROOF/INVALID, and retry the job
in error.
[2B51] List library error
Check if the Function list can be printed.
If it can be printed, retry the job in error.
If it cannot, replace the main memory.
If it still cannot be printed, initialize the HDD ([5] + [C] + [POWER] ON -> [3] -> [1])
[2BA0] Invalid Box password
Check if the password is correct.
Reset the password.
When this error occurs when printing the data in the Electronic Filing, perform the printing with the
administrator's password.
[2BA1]Invalid paper size/color mode/resolution.
The specified paper size, color more or resolution cannot be used. Check the setting.
[2BB1] Power failure
[2BD0] Power failure occurred during restoring of Electronic Filing
Check if the power cable is connected properly and it is inserted securely.
Check if the power voltage is unstable.
[2BE0] Machine parameter reading error
Turn the power OFF and then back ON. Perform the job in error again.
[2BF0] Exceeding maximum number of pages
Reduce the number of the pages of the job in error, and retry the job.
[2BF1] Exceeding maximum number of documents
Backup the documents in the box or folder to PC or delete them.
[2BF2] Exceeding maximum number of folders
Backup the folders in the box or folder to PC or delete them.
e-STUDIO2555C/3055C/3555C/4555C/5055C
ERROR CODE AND TROUBLESHOOTING
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
8 - 242