Transport Unit - Toshiba e-STUDIO 2555C Service Manual

4.11.3

Transport unit

(1) Remove the bypass feed clutch.
 P. 4-193 "4.11.2 Bypass feed clutch
(CLT3)"
(2) Remove the registration roller (Rubber).
 P. 4-46 "4.5.9 Registration roller
(Rubber)"
(3) Disconnect the 1 connector [1].
(4) Remove 7 screws and take off the rear
bracket [1] of the transport unit.
(5) Remove 1 screw and take off the stopper [1].
e-STUDIO2555C/3055C/3555C/4555C/5055C
DISASSEMBLY AND REPLACEMENT
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
4 - 194
Fig. 4-540
Fig. 4-541
Fig. 4-542