Sys Cooling Fan (F1) - Toshiba e-STUDIO 2555C Service Manual

4.6.34

SYS cooling fan (F1)

(1) Remove the SYS board cover.
 P. 9-1 "9.1.1 SYS Board cover"
(2) Disconnect the 1 connector [1], lift 2 latches
up, and remove the SYS board cooling fan
[2] by sliding it toward the front side.
4.6.35 Suctioning fan (F3)
(1) Remove the inner cover and front cover
switch bracket.
 P. 4-6 "4.1.16 Front cover switch (SW1)"
(2) Disconnect the 3 connectors [1], and release
the harness from the harness guide.
(3) Remove 1 screw, and release the latch [3]
and take off the suctioning fan cover [2].
(4) Remove the suctioning fan [1].
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-324
Fig. 4-325
Fig. 4-326
e-STUDIO2555C/3055C/3555C/4555C/5055C
4 - 115
DISASSEMBLY AND REPLACEMENT
4