Eeprom <For Lgc Board> - Toshiba e-STUDIO 2555C Service Manual

9.1.10 EEPROM <for LGC board>
(1) Take off the rear cover.
 P. 4-6 "4.1.15 Rear cover"
(2) Remove the EEPROM [1] from the LGC
board.
Notes:
Be careful not to damage the EEPROM
when replacing the EEPROM.
9.1.11 DRV board
(1) Remove the rear cover.
 P. 4-6 "4.1.15 Rear cover"
(2) Disconnect 12 connectors connected to the
DRV board.
(3) Remove 4 screws and take off the DRV
board [1].
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Fig. 9-28
Fig. 9-29
Fig. 9-30
e-STUDIO2555C/3055C/3555C/4555C/5055C
9 - 11
REPLACEMENT OF PC BOARDS/HDD
9