Key Board - Toshiba e-STUDIO 2555C Service Manual

4.2.2

KEY board

(1) Remove the control panel unit.
 P. 4-8 "4.2.1 Control panel unit"
(2) Remove 8 screws and take off the cover [1].
(3) Remove 7 screws and disconnect 1 flat
cable, and take off the KEY board [1].
4.2.3 DSP board
(1) Remove the control panel unit.
 P. 4-8 "4.2.1 Control panel unit"
(2) Remove 8 screws and take off the cover [1].
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-23
Fig. 4-24
Fig. 4-25
e-STUDIO2555C/3055C/3555C/4555C/5055C
4 - 9
DISASSEMBLY AND REPLACEMENT
4