Bypass Separation Roller - Toshiba e-STUDIO 2555C Service Manual

4.5.3

Bypass separation roller

(1) Remove the bypass feed roller.
 P. 4-39 "4.5.2 Bypass feed roller"
(2) Insert an object such as a blade edge of
flathead screwdriver, and lift the bypass
separation roller [1] to remove it.
Notes:
Do not touch the bypass separation roller [1]
as much as possible.
When installing the bypass separation roller
[1], push it in from both sides while being as
careful as possible not to touch it.
e-STUDIO2555C/3055C/3555C/4555C/5055C
DISASSEMBLY AND REPLACEMENT
Fig. 4-110
Fig. 4-111
Fig. 4-112
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
4 - 40