Toshiba e-STUDIO 2555C Service Manual page 1090

Sub
05/08 Mode Element
element
05 Adjustmen Printer Image Leading edge position
t mode adjustment (Speed at
low temperature)
05 Adjustmen Printer Feeding Paper aligning
t mode system/Pa amount adjustment
per
transport
05 Adjustmen Printer Feeding Paper aligning
t mode system/Pa amount adjustment
per
transport
Item Subitem Code
Subsidiary adjustment 4067
value
1st drawer 4100
1st drawer 4100
Sub- Default Acceptable
Details
code value value
6 LCF 50 0-100
0 Plain paper; Long size Refer to 0-63
content
1 Plain paper; Middle Refer to 0-63
size content
31
RAM Contents
M When the value increases by "1", the image shifts
toward the trailing edge of the paper by approx. 0.1 mm.
M When the value increases by "1", the aligning amount
increases as follows:
25/30/35ppm: 0.54 mm
45/50ppm: 0.81 mm
<Paper length>
Long size: 330 mm or longer
Middle size: 220 mm to 329 mm
Short size 1: 205 mm to 219 mm
Short size 2: 160 mm to 204 mm
Short size 3: 159 mm or shorter
<Default value>
25/30/35ppm: 27
45/50ppm: 15
M When the value increases by "1", the aligning amount
increases as follows:
25/30/35ppm: 0.54 mm
45/50ppm: 0.81 mm
<Paper length>
Long size: 330 mm or longer
Middle size: 220 mm to 329 mm
Short size 1: 205 mm to 219 mm
Short size 2: 160 mm to 204 mm
Short size 3: 159 mm or shorter
<Default value>
25/30/35ppm: 28
45/50ppm: 16
Proce Servic
dure e UI
4
4 Yes
4 Yes