Waste Toner Amount Detection Sensor (S36) - Toshiba e-STUDIO 2555C Service Manual

4.6.23

Waste toner amount detection sensor (S36)

(1) Remove the inner cover.
 P. 4-6 "4.1.16 Front cover switch (SW1)"
(2) Remove 1 screw and release the bracket [1].
(3) Disconnect the 2 connectors [1].
(4) Remove 1 screw and release the duct [2].
(5) Release the harness from the harness guide.
(6) Remove the waste toner amount detection
sensor [3].
4.6.24 Waste toner paddle motor (M7)
(1) Remove the inner cover.
 P. 4-6 "4.1.16 Front cover switch (SW1)"
(2) Remove 3 screws and disconnect the 1
connector [1], and then remove the waste
toner paddle motor unit [2].
e-STUDIO2555C/3055C/3555C/4555C/5055C
DISASSEMBLY AND REPLACEMENT
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
4 - 102
Fig. 4-291
Fig. 4-292
Fig. 4-293