[EA32] Exit paper remaining jam
Classification
Paper jam in finisher section
MJ-1107
Check item
Processing tray sensor
Finisher controller PC board
Parts to be replaced
Processing tray sensor
Finisher controller PC board
MJ-1108
Phenomenon of paper jamming
All
Parts to be replaced
Processing tray sensor (S12)
Finisher control PC board
(FIN)
e-STUDIO2555C/3055C/3555C/4555C/5055C
ERROR CODE AND TROUBLESHOOTING
Error content
Exit paper remaining jam
Measures
•
Sensor check(S12)
•
Connector check (CN11)
•
Harness check
•
Sensor check
•
Connector check (CN11)
•
Harness check
Remark
Check item
Measures
Finisher
Check if there is any paper in the finisher or on the
transport path of the equipment and remove it if
there is.
Processing
•
Sensor check
tray sensor
•
Connector check
(S12)
•
Harness check
Finisher
•
Board check
control PC
•
Connector check (CN18)
board (FIN)
•
Harness check
Remark
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
8 - 94