Color Reproduction Selection - Toshiba e-STUDIO 2555C Service Manual

6.2.21

Color reproduction selection

When the custom mode or red seal color mode is selected, the color reproduction can be adjusted as
follows.
<Adjustment Mode (05)>
Code Original mode
7690 Custom mode
7691 Red seal color mode
Notes:
Be sure that this adjustment is made after performing  P. 6-27 "6.2.1 Automatic gamma
adjustment".
<Procedure>
(1) While pressing [0] and [5] simultaneously, turn the power ON.
(2) Key in a code and press the [START] button.
(3) Key in an adjustment value.
(To correct a value once keyed in, press the [CLEAR] button.)
Press the [OK] or [INTERRUPT] button to store the value. → The equipment goes back to the
(4)
ready state.
(5) Press the [FAX] button and then press the [START] button to make a test copy.
(6) If the desired image quality has not been attained, repeat step (2) to (5).
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Item to be adjusted
Color reproduction 0: Text/Photo, printed image, text, map
1: Photo
adjustment
2: Red seal color mode
3: Text/Photo, printed image, text, map
4: Text/Photo, printed image, text, map
<Default value>
Custom mode: 0
Red seal color mode: 2
6 - 45
Remarks
e-STUDIO2555C/3055C/3555C/4555C/5055C
SETTING / ADJUSTMENT
6