Toshiba e-STUDIO 2555C Service Manual page 443

Notes:
When the writing start position (05-4019-0) for long-sized paper is changed, the one for medium-
sized paper is also altered. (However, the value of 05-4019-2 is not changed.)
If 05-4019-0 is changed, check it with A4-R/LT-R paper and adjust the value of 05-4019-2 again
as required.
<Adjustment procedure summarization for A to D>
[0] [5] [Power ON] → [98] ([3](05-4062, 4019) for duplexing) → [FAX]
A: 05-4006 (2nd drawer, A3/LD)
B: 05-4526-0 (2nd drawer, A3/LD)
C: 05-4402 (2nd drawer, A3/LD)
05-4058 (1st drawer, A4/LT)
05-4059 (2nd drawer, A3/LD)
05-4060 (3rd drawer, A4/LT)
05-4560 (4th drawer, A4/LT)
05-4061 (Bypass feed, A4/LT)
05-4062 (Duplexing, A3/LD)
D: 05-4019-0 (2nd drawer, A3/LD),
05-4019-1 (1st drawer, A4/LT)
05-4019-2 (A4-R/LT-R)
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
→
52±0.5 mm (0.04 mm/step)
→
200±0.5 mm (0.1 mm/step)
→
52±0.5 mm (0.1 mm/step)
→
52±0.5 mm (0.04 mm/step)
e-STUDIO2555C/3055C/3555C/4555C/5055C
6 - 17
SETTING / ADJUSTMENT
6