Toshiba e-STUDIO 2555C Service Manual page 257

(3) Remove the developer drive gear.
Notes:
When the gear has been replaced, grease its
teeth surface and the shaft.
Notes:
When replacing the parts or performing preventive maintenance, apply an appropriate amount of
white grease (Molykote EM-30L) to the shaft [1], the tooth surface of the gear [2] and the sliding
surfaces of the coupling [3].
[1]
[1]
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
[2]
[3]
Fig. 4-337
e-STUDIO2555C/3055C/3555C/4555C/5055C
4 - 121
Fig. 4-336
DISASSEMBLY AND REPLACEMENT
4