4.12.4
KN-2550 (Bridge Kit)
(1)
Press the [Power] button on the control panel
to shut it down.
(2)
Turn the main power switch of the equipment
off.
(3)
Disconnect the power cable.
(4)
Remove the right rear cover.
P. 4-4 "4.1.10 Right rear cover"
(5)
Remove 1 screw and take off the connector
cover.
(6)
Disconnect 1 connector.
(7)
Remove 1 screw and take off the front cover
of the bridge kit.
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-597
Fig. 4-598
Fig. 4-599
e-STUDIO2555C/3055C/3555C/4555C/5055C
4 - 217
DISASSEMBLY AND REPLACEMENT
4