Image Quality Control - Toshiba e-STUDIO 2555C Service Manual

4.8

Image Quality Control

4.8.1 Image quality control unit
(1) Remove the transfer belt unit.
 P. 4-130 "4.7.3 Transfer belt unit (TBU)"
(2) Remove 2 screws and disconnect the 1
connector [1], and then take off the image
quality control unit [2].
Notes:
The attachment screw on the rear side is a
shoulder screw, so exercise care when
handling it during installation.
Notes:
Be sure to pass the harness of the image
quality control unit through the harness
clamp.
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-403
Fig. 4-404
Fig. 4-405
e-STUDIO2555C/3055C/3555C/4555C/5055C
4 - 145
DISASSEMBLY AND REPLACEMENT
4