Update Procedure - Toshiba e-STUDIO 2555C Service Manual

11.2.2

Update procedure

Important:
• The file system of USB device should be formatted in the FAT or FAT32 format. Be careful since
the devices formatted in NTFS or other format will not be able to be operated. The file system
can be confirmed on the device properties in applications such as Explorer of Windows.
• Never shut down the equipment during the update. Firmware data and the following option data
(if installed) could be damaged and may not be able to be operated properly.
- Data Overwrite Enabler (GP-1070)
- Meta Scan Enabler (GS-1010)
- External Interface Enabler (GS-1020)
- IPSec Enabler (GP-1080)
- Hardcopy Security kit (GP-1190A)
[A] Updating firmware
(1) Connect the USB device to the PC and write the model specific folder in which the data file is
stored.
Store the data file for updating in the model specific folder.
(2) Press the [ON/OFF] button to shut down the equipment.
(3) Connect the USB device [1] to the USB port [2] on the right upper cover.
e-STUDIO2555C/3055C/3555C/4555C/5055C
FIRMWARE UPDATING
[2]
[1]
Fig.11-5
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
11 - 8