Toshiba e-STUDIO 2555C Service Manual page 656

[EAF1] Stack exit roller nip home position detection error
MJ-1036
Replacement part
Stack exit roller shift motor (M6)
Stack exit roller home position
sensor (S13)
e-STUDIO2555C/3055C/3555C/4555C/5055C
ERROR CODE AND TROUBLESHOOTING
The stack exit roller home position sensor (S13) does not detect
that the exit roller is not at the upper position after the stack exit
roller motor (M6) has been driven in the specified time when the
exit roller is moved down.
The stack exit roller home position sensor (S13) does not detect
that the exit roller is at the upper position after the stack exit
roller shift motor (M6) has been driven in the specified time
when the exit roller is moved up.
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
8 - 100
Measure