Toshiba e-STUDIO 2555C Service Manual page 569

Error code Classification
ED10 Finisher jam
ED11
ED12
ED13
ED14
ED15
ED16
EF10 Finisher jam
(Saddle Stitcher
section)
EF11
EF12
EF13
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Contents
Skew adjustment motor (M1) home position
detection abnormality: The Skew adjustment
motor is not at the home position. [MJ-1107/
1108 (when MJ-6104 is installed)]
Sideways adjustment motor (M2) home
position detection error: The Sideways
adjustment motor is not at the home position.
[MJ-1107/1108 (when MJ-6104 is installed)]
Shutter home position error: The shutter is not
at the home position. [MJ-1107/1108]
Front alignment plate home position error: The
front alignment plate is not at the home
position. [MJ-1107/1108]
Rear alignment plate home position error: The
rear alignment plate is not at the home
position. [MJ-1107/1108]
Paddle home position error: The paddle is not
at the home position. [MJ-1107/1108]
Buffer tray home position error: The buffer tray
is not at the home position. [MJ-1107/1108]
Paper not supported for Saddle Stitch Finisher:
Unsupported paper size, type and an excess
number of pages for stapling are selected. [MJ-
1108]
Saddle Stitch Finisher stapling error (front):
Front stapling is not correctly done. [MJ-1108]
Saddle Stitch Finisher stapling error (rear):
Rear stapling is not correctly done. [MJ-1108]
Saddle paper holder home position detection
abnormality: The paper holder home position
cannot be detected. [MJ-1108]
8 - 13
Troubleshooting
P. 8-108
P. 8-109
P. 8-109
P. 8-110
P. 8-111
P. 8-112
P. 8-113
P. 8-114
P. 8-115
P. 8-115
P. 8-115
e-STUDIO2555C/3055C/3555C/4555C/5055C
ERROR CODE AND TROUBLESHOOTING
8