NEC Univerge sv8500 Manual page 2223

Before downloading the Wave sound file, the FTP server (such as Internet Information Service) must be
installed in the network. Make sure connection between the FTP server and VS-32 can be established with-
out any problem.
VS-32> SETUP WAVEFILE 10.10.10.96
ftp 10.10.10.96
User: vs32
Password: *****
Please enter item number
1. Change remote working directory
2. List contents of remote directory
3. Receive remote file
4. List contents of local directory
5. Send local file
6. Copy local file
7. Rename local file
8. Delete local file
9. Check wave file for VS-32
10. Terminate ftp session and exit
enter(1-10):2
:
:
001.wav
:
:
enter(1-10):3
Remote file:001.wav
Copy OK:81392 bytes copied
:
:
enter(1-10):10
Wave file system is changed. Do you save it?
**Don't power off during save**
May I save ?[Y/N]y
########
Complete
Wave file system has been saved!!
STEP2
STEP3
STEP4
STEP5
STEP6
VOL.2-1970
STEP1:Enter an IP address for an FTP server. STEP1:Enter an IP address for an FTP server.
STEP1
STEP2:Enter a user name. STEP2:Enter a user name.
STEP3:Enter a password. STEP3:Enter a password.
STEP4:Enter "2" to display the files stored in the STEP4:Enter "2" to display the files stored in the
FTP server. FTP server.
STEP5:Enter "3" and specify a file name to down- STEP5:Enter "3" and specify a file name to down-
load the file. load the file.
STEP6 Enter "10" to adjust the wave sound file to STEP6 Enter "10" to adjust the wave sound file to
the system, and then save it to the Flash the system, and then save it to the Flash
ROM. ROM.
This setting is available after rebooting the system. This setting is available after rebooting the system.
VS-32 Conference Server