Setup Of Ip-Cs; Assignment For The Ip Address, Default Gateway Address, And Drs - NEC NEAX 2000 IPS Manual

SETUP OF IP-CS

To startup the IP-CS, following data assignment is required in addition to the system data assignment.
Assign the data for IP-CS Setup according to following procedure.

Assignment for the IP Address, Default Gateway Address, and DRS

IP Address, Default Gateway Address, and DRS can be assigned from a PC when LAN connection be-
tween the IP-CS and the PC is provided.
Following steps explain the assignment for IP Address, Default Gateway Address, and DRS.
STEP1: Connect the IP-CS and the PC.
To enable the remote login, accommodate the IP-CS and the PC on the same LAN network or
connect the IP-CS and the PC directly using the 10BASE-T/100BASE-T cable (straight cable).
TO AC ADAPTER
Connecting IP-CS and PC
IP-CS
10BASE-T / 100BASE-TX CABLE
(STRAIGHT CABLE)
– 68 –
CHAPTER 2 INSTALLATION

SETUP OF IP-CS

PC
NWA-008855-001 Rev.1.0
avch2001.fm