Generating Statistical Read/Write Report - Teledyne Sierra M6-2 User Manual

Analysis

Generating Statistical Read/Write Report

To create a statistical read/write page perform the following steps:
1. Click on the Setup > Preferences menu option.
2. Click on the Trace Viewer tab.
3. Check the box Create statistical report read/write page (see
Figure 3.36: Enabling Read/Write Statistical Report
Note:
This settings should be enabled before you capture the trace file.
If you have already captured a trace file and want to create a read/write statistical report
for the sample, perform the following steps:
1. Enable the read/write settings as mentioned above.
2. Open the trace file.
3. Set the X pointer on the first packet in the viewer.
4. Set the Y pointer on last packet in the viewer.
5. Save as the trace file using the X to Y option.
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
page 244).
Now the saved trace file will contain the read/write statistical report.
Teledyne LeCroy
Figure 3.35 on
245