Crosspoint Check - Teledyne Sierra M6-2 User Manual

Teledyne LeCroy

3.24.5 Crosspoint Check

To perform a Crosspoint‐Crosspoint bus test or Crosspoint external loop back, select the
Crosspoint tab.
Figure 3.161: SATA: Self Test Dialog Crosspoint Tab
Choose the Crosspoint Interconnection Pair or External loop back to test and click the
Start Crosspoint Check button. After a short time, the Test Result appears to the right of
the selected line.
346 Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Setup Menu