Teledyne Sierra M6-2 User Manual page 357

Compliance Test (SATA)
6. Select the Compliance Type as Host or Device.
7. Select the Device Type as ATA or ATAPI.
8. When testing SSD devices, select the SSD Drive checkbox, to ensure correct test
9. To view failed test traces in the sample viewer, check the
10. To save the failed test traces only, check the Save only failed test traces check box.
11. Enter a path and file name for the Compliance Report file, or use the default file
12. Enter a path and file name for the Saved Traces, or use the default folder:
13. After you select tests, click Start.
14. The test runs and, after a brief period, displays the result.
Figure 3.171: Compliance Test Result
15. To save the current compliance setup for later use, click the Save button to open the
16. To run a previously defined setup, click the Load button and choose a previously
Note:
When you are running Compliance Test, do not connect the analyzer to the Host if testing a
Device. Do not connect the analyzer to the Device if testing Host. Such improper connections can
impact compliance‐test result validity.
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
results.
Automatically load failed test traces into Sierra trace viewer check box.
name and path:
C:\Program Files\LeCroy\SATA Protocol Suite\User\Compliance_Device1.rtf
C:\Program Files\LeCroy\SATA Protocol Suite\User\
Save As dialog. Assign a meaningful name to the setup and save it as a *.cst
compliance file.
defined setup to run.
Teledyne LeCroy
355