Teledyne Sierra M6-2 User Manual page 492

Teledyne LeCroy
Setting
AutoMode Settings
AutoOOBMode
AutoHoldMode
AutoDMAT
AutoSpeedNeg
AutoAlignSATA
AutoAlignSAS
490
Default
Value Description
On When set, the generator will go through the stages of
bringing up the link automatically, including waiting
for and responding to the device or host it is
connected to.
0 When set, the generator will respond automatically
to Hold requests. Not supported for version 1.1
(reserved).
0 When set, the generator will respond automatically
to DMAT requests. Not supported for version 1.1
(reserved).
On When set, the generator will automatically go
throughthe speed negotiation process, for the speed
set in the PINTERFACEC_SERDES register for the
Trainer.
0 When set, the generator will automatically inserting
the stream 2 Align(0) primitives every 254
specified in the SATA spec.
On When set, the generator will automatically inserting
the stream Align primitives every 2048
specified in the SAS spec.Two Align modes can be
turned on simultaneously, to support STP
Sierra Trainer Generation Commands
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
s, as
DWORD
s, as
DWORD