Cursor Position Status Bar; Status Bar; Search Status; Using The Cursors And Bookmarks - Teledyne Sierra M6-2 User Manual

Status Bar

3.11.2 Cursor Position Status Bar

To display the cursor position status bar, select Toolbar > Cursor Position.
Figure 3.131: Cursor Position Toolbar
See
3.12 Status Bar
The Status bar is located at the bottom of the main display window.

3.12.1 Search Status

The right most segment displays the current search direction: Fwd (forward) or
Bwd (backward). Change the search direction from the Search Menu or double‐click the
Search Status segment.
3.13

Using the Cursors and Bookmarks

3.13.1 Cursors

The data viewer display incorporates three cursors labeled X, Y, and T. All cursors are
initially overlaid and positioned at location 0, which is the trigger position of the display.
The Trigger, or T, cursor is the measurement reference and is always at location 0 in the
display.
Positioning the X Cursor
To position the X‐Cursor within the viewer data display, click the left mouse button in the
gray bar on the left side of the sample viewer next to the line in which to place the cursor.
Positioning the Y Cursor
To position the Y‐cursor within the viewer data display, click the right mouse button in the
gray bar on the left side of the sample viewer next to the line in which to place the cursor.
Note:
You can also left‐click to set the X‐cursor and right‐click to set the Y cursor in the Frame and
Column View by clicking in the narrow strip on the very left side of a cell. Similarly, you can set
the cursors in the Waveform View by left and right clicking at the beginning of a waveform.
Time
Time differences between the cursors are displayed in the Cursor Position toolbar. To
display the cursor position toolbar, select Toolbar from the view menu and choose Cursor
Position.
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
"Using the Cursors and Bookmarks" on page 317.
Teledyne LeCroy
317